In Input volume, make sure the blue bar adjusts as you speak into the microphone. In Input, select a microphone to see its properties. Make sure that the microphone is positioned correctly. Make sure that the microphone or headset is connected correctly to your computer. The microphone volume is too low or does not appear to be working at all In Volume, make sure the blue bar moves to make sure Windows hears you. In Input, go to Choose a device for speaking or recording, and select the device you want. Select Start > Settings > System > Sound. Make sure that your microphone or headset is the system default recording device. Make sure that your microphone or headset is connected correctly to your computer. If your headset has a Mute button, make sure it isn't active. You can't turn off microphone access for individual apps. If you want to give access to desktop apps, make sure that Let desktop apps access your microphone is turned on. Make sure Let apps access your microphone is turned on, then choose which apps have access. Select Start > Settings > Privacy & security > Microphone and make sure Microphone access is turned on. If your microphone isn't detected after updating Windows 11, you may need to give your apps permission to use it. Make sure apps have access to the microphone Also turning off phantom power will make your laptop battery last longer, and depending on the quality of the interface, there might be a bit less noise.If you are having trouble with your microphone features, the following information can help you troubleshoot and resolve issues. It shouldn't usually be damaged by it, but no need to take chances. The SM57 is a dynamic microphone, so you won't need to turn on phantom power (the 48V switch/indicator). The cable to be used for that is an XLR (or microphone) cable with one female and one male XLR connector (XLR cables can be expected to always be that way). Unsurprisingly, the cable from the microphone actually belongs in the socket with a microphone painted on. The cable basically is the "I think I don't have a ground loop I need to break up" cheap equivalent of a DI box. The cable you are using is for plugging the TRS output of a mixer (for example) into an instrument amp: high voltage, often low impedance. The balanced connection is pretty important at typical microphone levels in order to keep hum and noise in check. Microphones are low-impedance low-voltage, balanced connection. Guitars are high-impedance high-voltage, unbalanced connection. How can I tell if the mic is not working?Ī microphone is no guitar. But nothing seems to go through the mic capsule. It seems the cable works, because it produces static noise when I move the mic around and the interface picks up that noise and shows that in the input LED. I logged in another mac system and tried to make it work there too, but same result. No sound whatsoever from the mic.Ĭould it be that the mic is not working? The interface works ok, as far as I can tell. Then I tried to record in Adobe Audition, Audacity and in Reaper. First installed all the drivers and set the interface as the default audio input device. I plugged the XLR female in the SM57 mic and the jack in the interface guitar input. Tried everything, installed the Focusrite USB (ASIO) driver, I made sure to set the proper input device in Windows 10 (default recording device) and output to my headphones, I switched to the Instrument line on the interface, I bumped the gain to the maximum, etc. But when I speak in the mic, I get no sound. When I handle the mic, I see the LED from the gain knob lighting up, probably from static stuff. I have a newly bought Scarlett Solo, in which I plugged an SM57 using an XLR to jack cable, in the guitar input.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |